Views: 0 Author: Site Editor Publish Time: 2023-02-13 Origin: Site
Trapezoidal PVC roofing tiles are new materials that have come to modern roofing. Generally speaking, the main parts of the building are defined as the ground, façade (internal and external walls), and roofing respectively, and each part has a building material corresponding to it. With the traditional concept, the most important function of roofing materials is waterproofing. Therefore, for thousands of years, in the water-scarce north, homes were mostly just mud-plastered on pitched or flat roofs, while in the rainy south, closely arranged mud tiles were required on the roof. Nowadays, environmental protection, heat insulation, heat preservation, and corrosion resistance have become essential requirements for roofing materials. PVC roof tiles are the main roofing material today.
The following is a list of contents：
The introduction of trapezoidal PVC roof tiles
Installation of trapezoidal PVC roof tiles
Nowadays, there is a rich variety of trapezoidal PVC roofing tiles. Our company also offers a wide variety of trapezoidal PVC roofing tiles, such as pavilion brick red waterproof PVC roofing tiles uphill, PVC roofing sheets T1130, and other various models of PVC roofing tiles to choose from. t1130 PVC roofing sheet is one of the most popular styles in the world. Its width is 1130mm, its maximum length is 11.8m, and its thickness is 2.0mm, and 2.5mm 3.0mm respectively. We have two main materials to meet the different needs of our customers. PVC roof tiles are more suitable for thin-thickness needs and its widely used in factories, warehouses, farmhouses, chemical plants, etc.
Trapezoidal PVC roof tiles also need to pay great attention to details when installation, if not paid attention, may make PVC roof tiles to deformation, leakage, and other problems, affecting the construction and use of the effect, but also may increase the cost of use. First, in the installation of the lap, PVC roof tiles to lateral lap a wave, its longitudinal lap length of not less than 250MM, and need to determine the lap according to the direction of water flow and wind direction. Second, all fixed pieces should be installed in the designated position, and to ensure that the fixed pieces and tile surface vertically, fixed pieces can not be tightened too much, to avoid the deformation of the tile and leakage. Third, when installing the fixed, it is recommended to use stainless steel tile hook, and with stainless steel pressure pieces and other fixed pieces for fixed, also need to use a plastic drill bit, its drill diameter than the diameter of the fixed pieces slightly larger than 1mm, open the hole should keep the edge of the aperture smooth, to avoid excessive concentration of force, in cold weather drilling needs to be careful. The fourth point is fixed pieces. The number of need to ensure that each square meter is not less than 6, trapezoidal PVC roof tiles laid on the perimeter of the scaffolding part, please increase the appropriate fixed pieces, and ensure that the wave tile out of the eaves of the part is within 100MM. The fifth point is to keep the span below 700MM when installing, so as not to cause the tile surface to fall, deform, and leak.
Our company has good quality and sales of PVC roof tiles, and we have many large distributors in different countries with good market sales. We have more than 10 years of experience in manufacturing and exporting. We are always improving our technology and using high-quality raw materials to provide our customers with high-quality products. If you are interested in our trapezoidal PVC roof tiles, you can check our company website, we are looking forward to hearing from you.
